P600 Aluminum Oxide
Designed for surface refinement and fine scratch preparation.
The 6in. (150mm) AO Gold Sanding Disc 17 Hole 600 Grit combines P600 aluminum oxide grain, resin-on-resin bonding, paper backing, and a hook-and-loop attachment layer.
The disc is used for primer sanding, P400 scratch refinement, paint preparation, blend-area sanding, wood coating refinement, plastic sanding, and composite surface preparation. Its 17-hole layout transfers sanding dust into a matching backing pad and vacuum system.
Aozhong manufactures coated abrasive discs for importers, distributors, automotive refinishing suppliers, woodworking suppliers, industrial users, and private-label programs. Production control covers abrasive coating, curing, lamination, disc conversion, hole punching, inspection, printing, labeling, and packaging.
P600 aluminum oxide sanding disc with paper backing, seventeen-hole dust extraction and hook-and-loop attachment.
Designed for surface refinement and fine scratch preparation.
Supports abrasive grain retention during sanding.
Provides support during random orbital sanding.
Supports convenient disc installation and replacement.
For use with a compatible seventeen-hole backing pad.
For compatible random orbital sanding systems.
Provides visual identification of the abrasive surface.
Designed for compatible dry-sanding processes.
For primer, paint, wood coatings and composite surfaces.
Grit, holes, print, label and packaging can be specified.
Application guidance for P600 aluminum oxide sanding discs used in automotive, woodworking, industrial coating and composite processes.
| Application Area | Suitable Processes | Operating Guidance |
|---|---|---|
|
Automotive Refinishing Primer and paint preparation
|
|
REFINEMENT STAGE
P600 is used during primer refinement and paint preparation. Final use before basecoat depends on the coating system and repair procedure. |
|
Primer and Paint Preparation Coating and repair-zone refinement
|
|
FINAL GRIT SELECTION
P600 supports scratch reduction and coating preparation within a multi-step sanding sequence. Follow the primer, paint or coating technical data sheet when selecting the final grit. |
|
Woodworking Sealer and coating refinement
|
|
APPLICATION LIMIT
P600 is intended for fine coating and finishing-system preparation. Not intended as the starting grit for:
|
|
Industrial Coating Preparation Coated equipment and metal surfaces
|
|
LIGHT REFINEMENT
The disc is intended for coating preparation and fine scratch transition. Not intended for:
|
|
Plastic and Composite Materials Tested preparation applications
|
|
SANDING TEST REQUIRED
Plastic and resin-based materials can soften when sanding generates excessive heat. Use controlled pressure, keep the sander moving and confirm suitability through a sanding test. |
P600 supports fine scratch transition before P800 or another coating-system grit.
Aozhong manufactures coated abrasive products for B2B distribution, automotive repair channels, woodworking suppliers, industrial users and private-label programs.
| Production Stage | Control Items | Control Focus |
|---|---|---|
|
Raw Material Control Incoming material verification
|
|
MATERIAL INPUT
Verifies abrasive grain, paper backing, resin, hook-and-loop material, lamination materials and incoming batch records. |
|
Coating and Curing Control Abrasive production records
|
|
COATING PROCESS
Records coating weight, abrasive distribution, resin application, oven temperature, curing time and production batch identity. |
|
Lamination and Disc Conversion Disc construction and punching
|
|
DISC CONVERSION
Checks lamination, finished diameter, roundness, edge quality, seventeen-hole layout and bonding between product layers. |
|
Finished-Product Inspection Dimension and performance checks
|
|
PRODUCT INSPECTION
Verifies P600 grit, abrasive surface, finished dimensions, hole layout, attachment, sanding results and backing-pad fit. |
|
Packaging Control Identification and shipment
|
|
PACKAGING OUTPUT
Checks product identity, grit marking, packing quantity, batch code, barcode, cartons and retained production samples. |
Controls can be applied from incoming materials through final packaging.
Aozhong supports bulk supply, OEM, ODM and private-label sanding-disc programs.
| Customization Category | Available Options | Confirmation Requirements |
|---|---|---|
|
Product Specification Disc and abrasive configuration
|
|
TECHNICAL SPECIFICATION
Confirm the diameter, grit, abrasive grain, paper-backing construction and applicable dimensional tolerances. |
|
Disc Construction Extraction and attachment system
|
|
COMPATIBILITY CHECK
Confirm the approved hole drawing, backing-pad compatibility, attachment material and abrasive-face color. |
|
Brand Identification Print, label and barcode
|
|
ARTWORK APPROVAL
Confirm print artwork, product information, label dimensions, barcode data and approved color references. |
|
Packaging and Export Retail and shipment packaging
|
|
PACKAGING APPROVAL
Confirm packing quantity, box construction, export-carton requirements, carton markings and destination information. |
Answers about Aozhong manufacturing, 17-hole pattern control, samples, batch consistency and private-label packaging.
Yes. Aozhong manufactures coated abrasive discs for importers, distributors, automotive repair suppliers, woodworking suppliers, industrial users and private-label programs. Production covers coating, curing, lamination, punching, inspection, printing and packaging.
Hole count, hole diameter, pitch circle, center position and punching tolerance can be inspected against an approved drawing. Buyers can provide a backing-pad drawing or physical pad sample for compatibility checks.
Yes. Samples can be supplied for scratch-pattern review, primer and paint sanding tests, backing-pad fit checks, hole alignment, attachment testing and packaging approval. Production specifications are confirmed after sample evaluation.
Incoming materials, coating settings, curing conditions, disc dimensions, hole positions, attachment layers, P600 markings, labels and packaging can be checked by production batch. Batch identification and retained samples can be included in the inspection plan.
Yes. Options include backing print, labels, barcodes, pack quantities, inner boxes, export cartons and carton markings. Artwork, specifications, tolerances and inspection criteria are confirmed before production.