P180 Abrasive Grade
For heel and sole filing.
P180 Self-Adhesive Foot File Sandpaper is a die-cut abrasive refill used with compatible foot file bases. It consists of an abrasive grain layer, resin bond, paper backing, pressure-sensitive adhesive, and release liner.
Remove the liner, align the pad with the foot file base, and press it into position. The P180 abrasive surface is used for controlled filing of surface callus on the heel and sole during pedicure services. After the service, remove the abrasive refill and dispose of it according to the salon hygiene procedure.
Aozhong manufactures foot sanding pads for distributors, salon suppliers, wholesalers, private-label buyers, and pedicure product programs. Available options include size, shape, abrasive grain, grit, color, liner printing, label, pack quantity, and carton marking.
For heel and sole filing.
Supports attachment to a foot file base.
Protects the adhesive before installation.
Follows the outline of the holder.
Reduce exposed corners around the foot file edge.
Supports alignment and removal.
Transfers filing pressure to the abrasive surface.
Holds the abrasive grain on the backing.
Supports single-client service procedures.
Size, shape, grit, printing, and packaging can be configured for OEM orders.
The abrasive grain contacts the heel surface and removes material through manual filing. Silicon carbide and aluminum oxide are available for this product category.
The resin bond fixes the grain to the backing and controls grain retention during use.
The paper layer carries the abrasive coating and allows the refill to follow the surface of the foot file base.
The PSA layer bonds the refill to a clean and dry holder after pressure is applied.
The liner protects the adhesive during storage, transport, and handling. It is removed before the pad is installed.
The oblong outline, rounded ends, and end notch are produced by die cutting. The dimensions must match the foot file base.
P180 Self-Adhesive Foot File Sandpaper is intended for the following cosmetic foot-care and supply applications.
| Application Category | Typical Applications | Application Direction |
|---|---|---|
|
01
Manual Foot Care Heel and sole filing
|
|
P180 provides a defined abrasive stage for manual cosmetic surface filing.
|
|
02
Salon and Refill Supply Professional service programs
|
|
Individual replacement supports organized refill supply and single-client service procedures.
|
|
03
Retail and Private Label Packaged foot-care products
|
|
Size, shape, grit identification and packaging can be configured for retail and private-label programs.
|
Aozhong is an abrasive product manufacturer with production and converting facilities. The company supplies coated abrasives, sanding discs, PSA abrasives, sponge abrasives, mesh abrasives, and non-woven products for B2B and private-label programs.
| Production Stage | Control Items | Control Focus |
|---|---|---|
|
01
Material and Coating Control Abrasive specification
|
|
Verifies the abrasive grain, paper backing, resin coating and P180 grit specification before conversion.
|
|
02
Adhesive Lamination PSA and release liner
|
|
Checks adhesive application, release-liner placement and peel performance for attachment to the foot file holder.
|
|
03
Die Cutting and Dimensions Shape and holder compatibility
|
|
Confirms the refill outline, dimensions, rounded ends and notch position against the approved holder specification.
|
|
04
Identification and Packaging Batch and shipment control
|
|
Supports product identification, batch traceability, packing quantity control and retained-sample management.
|
Yes. Aozhong manufactures and converts abrasive products for distributors, importers, wholesalers, salon suppliers, and private-label buyers.
Yes. Buyers can provide a base sample or drawing. Samples can be checked for shape fit, edge alignment, adhesive hold, removal, residue, and filing action before production approval.
Control can include incoming grain records, coating inspection, grit verification, approved-sample comparison, batch identification, and retained samples.
Yes. Liner printing, logo, label, barcode, pack quantity, inner box, carton marking, and language versions can be configured according to the order specification.
The PSA system can be checked for liner release, initial tack, holding power, edge lift, removal force, and residue on the approved foot file base. Testing should use the customer’s holder material because wood, plastic, and metal surfaces can produce different results.