Pyramid abrasive structure refines sanding marks before polishing.
The Aozhong Pyramid Abrasive Foam Disc is designed for clear coat sanding, paint correction, scratch refinement and polishing preparation. It combines a structured abrasive surface, carrier layer, foam cushion and hook-and-loop backing.
During sanding, the abrasive structure refines marks from the previous sanding step and prepares the surface for compound polishing. The foam layer distributes pressure across flat areas, curves and body contours. It also helps reduce pressure concentration around panel edges and repair zones.
Aozhong manufactures abrasive products for distributors, automotive refinishing suppliers and production users. Disc diameter, foam thickness, abrasive type, grade, surface color and backing color can be configured according to the sanding process.
Structured abrasive disc construction for controlled scratch refinement, contour sanding and preparation before polishing.
Pyramid abrasive structure refines sanding marks before polishing.
Foam backing distributes contact pressure across the work surface.
Hook-and-loop attachment supports disc replacement and repositioning.
Disc construction follows curves, body panels and bumper contours.
No-hole surface provides abrasive coverage across the disc face.
Structured abrasive · Foam layer · Loop backing
Color options support grade and product identification.
Abrasive, foam thickness, hardness, diameter and backing can be configured.
Suitable for random orbital sanders, sanding blocks and interface pads.
Available for distributor packaging and production programs.
Application areas for controlled coating refinement, spot repair, scratch reduction and preparation before polishing.
The disc can be used for:
A paint correction sanding disc helps convert marks from the defect-removal stage into a surface that can be processed with polishing compound and a polishing pad.
The disc does not replace the polishing stage. Sanding removes or refines defects, while polishing restores gloss and removes the sanding haze.
The foam-backed construction can be used on doors, fenders, bumpers, hoods and other painted parts.
Disc diameter and foam hardness should match the size and contour of the repair area.
Selected grades can be used for primer refinement and coating preparation.
The grade should be chosen according to coating hardness, film thickness and the next process step.
After workpiece testing, the product may also be used on:
Final selection should be confirmed through workpiece testing. Coating hardness, film thickness, previous sanding marks, machine orbit, pressure and polishing process can affect the final result.
Aozhong manufactures abrasive products and supports specification-based production for distributor and industrial orders.
Production can be approved against a drawing, reference sample, sanding panel or agreed process result.
Purchase specifications should identify the grade system, abrasive type, disc dimensions, foam structure and target application.
Structured abrasive and foam-backed disc construction for controlled automotive coating refinement and preparation before polishing.
Aozhong Pyramid Abrasive Foam Disc is used for automotive paint sanding, clear-coat scratch refinement, paint correction and polishing preparation. The abrasive surface refines marks from the previous process.
Its construction combines a structured abrasive surface, carrier, foam cushion and hook-and-loop backing. The foam follows panel contours and distributes sanding pressure.
Structured abrasive surface
Carrier layer
Foam cushion
Hook-and-loop backing
Aozhong can configure abrasive type, grade, diameter, foam thickness, hardness, color, hole pattern and packaging for distributor and production orders.
Product dimensions, structure, identification and packaging can be configured for distributor inventory and production-use programs.
Grade numbers must be confirmed by specification because P-grade markings, particle-size values and manufacturer grade numbers are not interchangeable.
Information about sample testing, batch consistency, grade matching, wet-sanding specifications and distributor packaging.
Yes. Samples can be prepared according to the requested diameter, abrasive, grade, foam thickness, color and backing. The customer should test the sample with the intended paint system, sander and polishing process.
The order specification can define diameter, thickness, foam hardness, grade marking, backing strength and sanding-result requirements. An approved sample or test panel can serve as the production reference.
Aozhong can develop a sample based on an existing disc or target finish. Matching should compare sanding marks, cut rate, surface haze, disc life and polishing removal time rather than the printed grade number alone.
Wet-use specifications require confirmation of the resin bond, lamination adhesive, foam structure and backing. Wet sanding should only be stated on the label after the product construction has been approved for water exposure.
Packing quantity, back printing, label, barcode and carton artwork can be specified for the order. Product identity and grade information should be approved before packaging production.