Double-sided use
Both the top and bottom surfaces are working surfaces; once one side is worn, the product can be turned over for continued use, or the sides can be used alternately depending on how it is held.
Six-grit foam sanding pad set for hand sanding on flat surfaces, curves, edges and contours.
Aozhong Double-Sided Sanding Sponge Kit is designed for hand sanding from P60 material removal through P320 surface preparation.
Each pad consists of a foam core with abrasive surfaces on both faces. The foam allows the sanding pad to bend around curves, edges and profiles while maintaining contact with the workpiece. Both abrasive faces carry the same grit unless a dual-grit construction is specified.
Both the top and bottom surfaces are working surfaces; once one side is worn, the product can be turned over for continued use, or the sides can be used alternately depending on how it is held.
The 120 × 100 mm sheet-like structure is designed to fit comfortably in the hand. The 12 mm sponge layer provides cushioning between the hand and the workpiece.
The product can be bent, wrapped or moulded to fit curved surfaces. Similar double-sided sponge sanding discs in the industry are typically used on flat surfaces, curved surfaces, contours and corners.
The sponge core disperses the concentrated pressure exerted by the fingers, reducing the likelihood of deep, localised scratches occurring at the points of contact.
Grades P60 to P320 can be combined to form a manual sanding process ranging from coarse to fine grinding, making them suitable for resellers to sell as kits and for end customers to establish a sequence of grit sizes.
The brand and grit size are printed on the side of the sponge, allowing the specifications to be read even when stacked or stored.
Users have confirmed that the following can be customised:
For burr removal or stock removal, a powered abrasive product may be required.
A sample test is recommended for transparent plastic, coated trim and appearance parts.
Aozhong manufactures abrasive products for distributor programs and production users. The Double-Sided Sanding Sponge Kit can be supplied with order-based control of:
Aozhong’s production workflow can include:
Foam preparation
Abrasive-layer converting
Lamination
Cutting
Printing
Set assembly
Inspection
Packing
Samples can be prepared according to the requested grit, foam, size and abrasive system. Buyers should test the samples on their work material and approve the product specification before production.
Production control can cover abrasive mineral, grit identification, coating condition, foam specification, dimensions and bond adhesion. Finished products can be linked to a batch code and approved product specification.
Foam material, density, hardness, thickness, length and width can be configured according to the application and packaging requirement.
The current product configuration supports wet and dry sanding. For custom orders, wet-use compatibility must be confirmed for the foam, abrasive bond, lamination and printing system.
Aozhong can configure logo printing, grit marking, product codes, set quantity, labels, barcodes, boxes and export cartons according to approved artwork and order specifications.