• Diamond Wet Polishing Pads,Diamond Wet Polishing Pads
  • Diamond Wet Polishing Pads,Diamond Wet Polishing Pads
  • Diamond Wet Polishing Pads,Diamond Wet Polishing Pads
  • Diamond Wet Polishing Pads,Diamond Wet Polishing Pads
  • Diamond Wet Polishing Pads,Diamond Wet Polishing Pads
  • Diamond Wet Polishing Pads,Diamond Wet Polishing Pads

Diamond Wet Polishing Pads

No.DWP-100-RB-W-HL-SET7
Source resin bond Diamond Wet Polishing Pads from Aozhong for granite, marble, quartz, engineered stone, terrazzo and concrete. Available in 50# to 3000# with hook-and-loop backing, grit-set packaging and OEM supply.
Product Name
Diamond Wet Polishing Pad
Product Type
Resin Bond Diamond Polishing Disc
Abrasive Material
Industrial Diamond Powder
Backing Type
Hook & Loop Backing
Thickness
5mm – 8mm
Grit Range
50# – 3000#
Feature
Flexible / Fast Cutting / Long Life
Materials
Granite, marble, quartz, engineered stone, terrazzo, concrete, ceramic and tile
Custom options
Diameter, thickness, grit set, color, printing and packaging
  • Diamond Wet Polishing Pads,Diamond Wet Polishing Pads
  • Diamond Wet Polishing Pads,Diamond Wet Polishing Pads
  • Diamond Wet Polishing Pads,Diamond Wet Polishing Pads

Description

Diamond Wet Polishing Pads

Resin Bond Diamond Pads for Stone Grinding and Polishing

Aozhong Diamond Wet Polishing Pads use industrial diamond powder, a resin bond working layer, water-flow channels, a center hole, and hook-and-loop backing. The pads are used for grinding, scratch refinement, surface finishing, and polishing on granite, marble, quartz, engineered stone, terrazzo, concrete, ceramic, and tile.

The segmented working surface allows water and slurry to move between the resin blocks. Water removes heat, carries stone residue away from the contact area, and supports the transition between grit stages.

The product is available from 50# to 3000# for stone fabrication, countertop processing, edge polishing, surface repair, and installation work. Aozhong supplies distributors, wholesalers, stone-tool suppliers, fabricators, and OEM programs.

Product Features

01

Industrial Diamond Powder

Cuts granite, marble, quartz and concrete.

02

Resin Bond

Controls diamond retention and working-layer wear.

03

Segmented Blocks

Create contact zones across the stone surface.

04

Slurry Channels

Carry water and stone slurry away from the grinding area.

05

Wet Polishing Process

Water controls heat during the polishing process.

AOZHONG 100 DIAMOND PAD
WET POLISHING PAD SEGMENTED RESIN DIAMOND
06

Hook-and-Loop Backing

Supports pad replacement between grit stages.

07

Flexible Support Layer

Follows countertop edges, radii and profiles.

08

Grit Identification

Grit marking supports warehouse and process identification.

09

Complete Grit Sets

Cover grinding, scratch refinement and polishing stages.

10

Distribution Programs

Product dimensions and packaging can be configured.

Product Structure

01

Industrial Diamond Working Layer

Industrial diamond powder provides the cutting points used to remove saw marks, grinding scratches and surface irregularities from mineral-based materials.

02

Resin Bond Matrix

The resin matrix holds the diamond particles during operation. As the matrix wears, new diamond cutting points are exposed. Bond hardness, diamond concentration and stone type affect cut rate, pad wear and surface finish.

03

Segmented Surface

The face contains resin blocks arranged in circular rows. The spaces between the blocks provide channels for water, stone residue and polishing slurry.

04

Support Layer

The support layer connects the resin blocks to the attachment layer and allows the pad to follow edges, radii and surface contours.

05

Hook-and-Loop Backing

The loop backing attaches to a matching hook backing pad. This system allows the operator to change grit stages without changing the holder.

06

Center Hole

The center hole supports pad alignment and water movement. Hole diameter must be confirmed against the pad holder and water-feed system.

Stone Applications

Material Typical Applications Processing Guidance
01
Granite Grinding and polishing
  • Countertops
  • Slabs
  • Edges
  • Sink cutouts
  • Seams
  • Bevels
  • Installation repairs
The operator progresses through the grit sequence until the required surface finish is reached.
02
Marble Controlled surface polishing
  • Marble slabs
  • Tiles
  • Edges
  • Repair areas
Pressure, water flow and dwell time should be controlled to reduce edge damage and surface marks.
03
Quartz and Engineered Stone Edge and surface refinement
  • Edge processing
  • Scratch refinement
  • Surface finishing
Sample testing is required because resin content, mineral content and slab formulation affect pad performance.
04
Concrete and Terrazzo Countertop and precast processing
  • Concrete countertops
  • Precast products
  • Terrazzo surfaces
A pad formulation intended for stone should be tested before use on concrete because bond wear differs by substrate.
05
Ceramic and Tile Edge finishing and correction
  • Edge finishing
  • Cut-edge correction
  • Local surface work
Pressure and grit progression must be controlled to limit chipping and glaze damage.

Aozhong Manufacturing Support

Aozhong manufactures abrasive and polishing products for distributors, wholesalers, stone-tool suppliers, industrial users and private-label programs.

Production Stage Manufacturing and Control Items Control Focus
01
Material Control Diamond and resin materials
  • Diamond powder inspection
  • Resin and filler verification
  • Bond formulation control
Verifies the diamond powder, resin, filler and bond formulation before the working layer is produced.
02
Mixing, Molding and Curing Working-layer production
  • Mixing-process records
  • Segment molding
  • Curing-process control
Controls material mixing, segment formation and curing according to the approved pad specification.
03
Lamination and Conversion Pad construction and dimensions
  • Support-layer lamination
  • Hook-and-loop backing application
  • Diameter cutting
  • Center-hole cutting
Builds the pad layers and converts the product to the required diameter and center-hole specification.
04
Finished-Product Inspection Surface and attachment checks
  • Thickness inspection
  • Segment-surface inspection
  • Backing-adhesion testing
  • Grit marking
Checks pad thickness, segment condition, backing adhesion and grit identification before packaging.
05
Batch and Packaging Control Traceability and shipment review
  • Batch identification
  • Sample retention
  • Packaging inspection
Supports production traceability, retained sample management and final packaging verification.
OEM
Product Development

Aozhong supports product development by diameter, thickness, resin bond, grit sequence, backing color, grit printing, label, barcode, inner box and export carton.

TEST
Stone Sample Testing

Samples can be supplied for stone testing before order confirmation. Buyers can evaluate material removal, scratch transition, gloss development, pad wear, resin transfer, segment condition and backing adhesion.

Frequently Asked Questions

01 Is Aozhong a manufacturer?

Yes. Aozhong manufactures and converts abrasive and polishing products for B2B supply. Product support covers sanding discs, abrasive rolls, sanding belts, non-woven abrasives, sponge abrasives and polishing pads.

02 Can we test samples before placing a production order?

Yes. Samples can be prepared for granite, marble, quartz, engineered stone or concrete testing. Buyers can check cut rate, scratch transition, gloss, pad wear and holder compatibility.

03 How do you control consistency between production batches?

Control points can include raw-material records, bond-formulation records, curing records, diameter and thickness inspection, segment checks, backing-adhesion inspection, grit verification, batch coding and sample retention.

04 Can the grit sequence and packaging be customized?

Yes. Grit combinations, backing colors, printed numbers, pack quantities, labels, barcodes, boxes and carton markings can be produced according to the approved order specification.

05 What information is required to confirm compatibility?

Provide the stone type, pad diameter, machine model, spindle thread, holder diameter, water-feed method, operating speed and required grit sequence. A holder sample or drawing can be used for fit confirmation.

Leave a message
お名前 *
メールアドレス *
会社名
お問い合わせ内容・ご希望の製品仕様