• Perforated Hook and Loop Sanding Strips for Bodywork,Hook and Loop Sanding Strips for Automotive Hand Sanding | Aozhong
  • Perforated Hook and Loop Sanding Strips for Bodywork,Hook and Loop Sanding Strips for Automotive Hand Sanding | Aozhong
  • Perforated Hook and Loop Sanding Strips for Bodywork,Hook and Loop Sanding Strips for Automotive Hand Sanding | Aozhong
  • Perforated Hook and Loop Sanding Strips for Bodywork,Hook and Loop Sanding Strips for Automotive Hand Sanding | Aozhong
  • Perforated Hook and Loop Sanding Strips for Bodywork,Hook and Loop Sanding Strips for Automotive Hand Sanding | Aozhong
  • Perforated Hook and Loop Sanding Strips for Bodywork,Hook and Loop Sanding Strips for Automotive Hand Sanding | Aozhong

Perforated Hook and Loop Sanding Strips for Bodywork

No.AZ-RHS-P80-8H
Perforated hook and loop sanding strips for automotive filler, primer and paint preparation. P-grit, size, hole pattern and OEM packaging by order.
Product Type
Hook and Loop Sanding Strips
Abrasive Type
Ceramic / Aluminum Oxide
Backing Material
Paper / Polyester Film
OEM Service
Supported
Shape
Rectangular
Size
Customization
Attachment system
Hook-and-loop
Backing layer
Loop/velour backing
Available grit range
Confirm according to product series
Hole patterns
8-hole and multi-hole
Color
Purple, green, yellow, or order-based product color
Sanding method
Hand sanding with sanding block
Packaging
Sheets per box and cartons per order
Custom options
Size, grit, hole pattern, print, color, box, label, carton
  • Perforated Hook and Loop Sanding Strips for Bodywork,Hook and Loop Sanding Strips for Automotive Hand Sanding | Aozhong
  • Perforated Hook and Loop Sanding Strips for Bodywork,Hook and Loop Sanding Strips for Automotive Hand Sanding | Aozhong
  • Perforated Hook and Loop Sanding Strips for Bodywork,Hook and Loop Sanding Strips for Automotive Hand Sanding | Aozhong

Description

Hook and Loop Sanding Strips

Perforated abrasive strips for automotive bodywork, filler leveling, primer sanding, paint preparation, and dust-extraction hand sanding.

Aozhong Hook and Loop Sanding Strips are designed for automotive hand sanding with sanding blocks and dust-extraction hand tools.

Each strip combines an abrasive surface, backing material, loop layer, and extraction holes. The loop backing attaches to a hook-face sanding block for installation, removal, and grit changes. Hole patterns provide channels for sanding dust when the strip is used with a matching extraction block.

The product is supplied in rectangular formats for filler shaping, primer leveling, paint-edge feathering, old-coating removal, and surface preparation before refinishing. The supplied product images confirm a P80 version, along with 8-hole and multi-hole configurations. Other dimensions, grits, abrasive minerals, backing types, and hole patterns are supplied according to the order specification.

Aozhong manufactures and converts abrasive products for distributors, automotive refinishing suppliers, body shops, paint shops, and volume users. Product size, grit, hole pattern, backing, printing, box quantity, and private-label packing can be configured for each purchasing program.

PRODUCT FEATURES

Hook-and-Loop Sanding Strips

Rectangular abrasive strips for hand blocks, longboard sanding and compatible dust-extraction sanding systems.

01

Hook-and-Loop Backing

Supports attachment and removal from compatible hook-face sanding blocks.

02

Rectangular Strip Format

Designed for hand sanding, sanding blocks and longboard sanding processes.

03

Dust-Extraction Holes

Extraction holes transfer sanding dust into a compatible dust-collection block.

04

Multiple Hole Configurations

Eight-hole and multi-hole layouts can be produced for different sanding-block systems.

05

P-Grit Identification

Printed backing markings support grit identification and workstation control.

P180 HOOK & LOOP
8-HOLE EXTRACTION FORMAT
DUST-EXTRACTION SYSTEM Hook-and-Loop Sanding Strip Hand block · Longboard · Custom hole pattern
06

Multiple Strip Sizes

Dimensions can be configured for different sanding-block and longboard formats.

07

Application-Based Abrasives

Abrasive configurations are available for filler, primer, paint and coating work.

08

PSA-Free Replacement

Sheets can be installed and replaced without a pressure-sensitive adhesive layer.

09

OEM Specification Support

Dimensions, hole patterns, backing print and packaging can be customized.

10

Repeat-Order Batch Control

Grit, dimensions, hole layout, attachment and packaging can be checked by batch.

ORDER CONFIGURATION Buyer-Defined Sanding Strip Options
Strip Width Strip Length P-Grit 8-Hole Multi-Hole Backing Print Pack Quantity Private Label

Applications

Hook-and-loop sanding strips for filler shaping, primer sanding, coating repair and surface preparation.

Application Area Typical Use Process Guidance
Body Filler Shaping Repair-area leveling
  • Cured body-filler shaping
  • Repair-area leveling
  • Surface-profile correction
  • P80 and related grit stages
P80 and related grades are used for shaping and leveling cured body filler. A sanding block distributes hand pressure across the repair area.
Primer Sanding Coating-stage preparation
  • Filler-primer sanding
  • Primer-surfacer sanding
  • Repair-primer sanding
  • Preparation for the next coating
The strip grit and abrasive structure should be selected according to the primer system and the required next coating stage.
Paint Edge Feathering Repair-transition refinement
  • Paint-edge refinement
  • Existing-coating transition
  • Repair-edge blending
  • Local surface preparation
Used to refine the transition between the existing coating and the repair area.
Old Paint Removal Damaged-coating removal
  • Damaged paint removal
  • Old coating removal
  • Repair-zone preparation
  • Preparation for filler or primer
Coarse and medium grades can remove damaged coating layers and prepare the surface for repair materials.
Surface Preparation Preparation before coating
  • Preparation before primer
  • Preparation before basecoat
  • Preparation before clear coat
  • General coating preparation
The final sanding grade must follow the requirements of the primer, basecoat, clear-coat or other coating system.
Wood and Industrial Coatings Application-test dependent
  • Wood surfaces
  • Composite panels
  • Coated plastic
  • Industrial finishes
The product may be evaluated on these materials. Testing is required before production use.
GENERAL REPAIR SEQUENCE Progressive Surface Preparation
01 Shape Level filler or remove damaged coating
02 Refine Reduce scratches from the previous stage
03 Prime Level and refine the primer surface
04 Prepare Follow the coating-system grit requirement
!

Confirm the sanding specification. Grit selection depends on the substrate, repair stage, coating system, sanding block, extraction method and required final surface.

Aozhong Manufacturing Support

Aozhong is an abrasive product manufacturer supplying distributors, private-label programs, repair systems and volume users.

Production Stage Manufacturing Controls Control Purpose
01
Material Configuration Abrasive and backing selection
  • Abrasive-material configuration
  • Paper, film or composite backing
  • Resin-bonding system selection
  • Dry- or wet-use specification
Establishes the abrasive mineral, P-grit, backing construction and operating method required for the application.
02
Lamination and Conversion Layer and format processing
  • Loop-backing lamination
  • Roll slitting
  • Sheet cutting
  • Rectangular die cutting
Controls attachment-layer bonding and converts the abrasive into the required strip dimensions and shape.
03
Hole-Pattern Processing Dust-extraction compatibility
  • Eight-hole punching
  • Multi-hole punching
  • Hole-position inspection
  • Pattern comparison with approved drawing
Confirms alignment between the abrasive strip and compatible dust-extraction sanding-block channels.
04
Product Inspection Dimensions and identification
  • Backing-side grit printing
  • Length and width inspection
  • Hole-position inspection
  • Loop-adhesion inspection
Verifies product dimensions, P-grit identification, hole layout and backing attachment before packaging.
05
Packaging and Batch Control OEM and repeat-order supply
  • Sheet-count control
  • Carton-quantity control
  • OEM label and package production
  • Batch identification
  • Sample approval for repeat orders
Supports package accuracy, private-label supply, batch traceability and repeat-order comparison.
REPEAT-ORDER CONTROL

Approved Product Specification

The approved specification and control sample provide references for production, outgoing inspection and buyer incoming inspection.

01 Dimensions
02 Tolerances
03 Abrasive Mineral
04 P-Grit
05 Backing
06 Hole Pattern
07 Loop Adhesion
08 Dry or Wet Use
09 Printing
10 Box Quantity
11 Carton Configuration
12 Approved Sample

FAQ

Information about hole-pattern matching, samples, repeat-order control, private-label packaging and sanding-block compatibility.

01 Can Aozhong match our sanding-block hole pattern?

Yes. Buyers can provide a dimensioned drawing, a 1:1 hole-layout file, an approved strip or a sanding-block sample. Hole diameter, spacing and sheet dimensions can then be included in the order specification.

02 Can we test samples before placing a volume order?

Yes. Samples can be prepared according to the requested size, grit, hole pattern, backing and abrasive configuration. Buyers can test block fit, extraction, cut rate, loading, scratch pattern and loop adhesion before approval.

03 How does Aozhong control repeat-order consistency?

Control items can include raw-material lot, abrasive coating, grit, backing, loop lamination, dimensions, hole position, cut rate, scratch pattern, packing quantity and batch code. The approved sample and signed specification can be retained as the order reference.

04 Can the product be supplied with private-label packaging?

Yes. OEM options include backing print, grit marking, product color, sheet size, hole pattern, sheets per box, label, barcode, box and shipping carton.

05 How do we select the size and hole pattern?

First confirm the sanding-block width and length. Then check the number, diameter, spacing and position of the extraction holes. The abrasive strip and sanding block should be approved together before a volume order.

Leave a message
お名前 *
メールアドレス *
会社名
お問い合わせ内容・ご希望の製品仕様