• Hook and Loop Multi-Hole Foam Sanding Discs for Automotive Refinishing,Multi-Hole Foam Sanding Discs for Automotive Refinishing | Aozhong
  • Hook and Loop Multi-Hole Foam Sanding Discs for Automotive Refinishing,Multi-Hole Foam Sanding Discs for Automotive Refinishing | Aozhong
  • Hook and Loop Multi-Hole Foam Sanding Discs for Automotive Refinishing,Multi-Hole Foam Sanding Discs for Automotive Refinishing | Aozhong
  • Hook and Loop Multi-Hole Foam Sanding Discs for Automotive Refinishing,Multi-Hole Foam Sanding Discs for Automotive Refinishing | Aozhong
  • Hook and Loop Multi-Hole Foam Sanding Discs for Automotive Refinishing,Multi-Hole Foam Sanding Discs for Automotive Refinishing | Aozhong
  • Hook and Loop Multi-Hole Foam Sanding Discs for Automotive Refinishing,Multi-Hole Foam Sanding Discs for Automotive Refinishing | Aozhong

Hook and Loop Multi-Hole Foam Sanding Discs for Automotive Refinishing

No.AZ-FSD-150-MH
Hook and loop foam sanding discs for primer, paint and clear-coat sanding. Abrasive, grit, foam, diameter, hole pattern and OEM packing options.
Product Name
Foam Sanding Disc
Backing Type
Sponge + Hook & Loop
Abrasive Type
Aluminum Oxide / Silicon Carbide / Ceramic
Shape
Round Disc
Hole Type
Multi-Hole Dust Extraction
Grit Range
P80–P3000
Application
Dry Sanding / Optional Wet Sanding
Foam material
PU, EVA, or order-based foam
Foam hardness
Soft, medium, firm, or specification-based value
Disc color
Pink, blue, green, white, gray, or order-based color
Foam color
Yellow, red, black, or order-based color
Packaging
Pieces per box and boxes per carton by order
Custom options
Diameter, grit, mineral, foam, color, perforation, center hole, print, packaging
  • Hook and Loop Multi-Hole Foam Sanding Discs for Automotive Refinishing,Multi-Hole Foam Sanding Discs for Automotive Refinishing | Aozhong
  • Hook and Loop Multi-Hole Foam Sanding Discs for Automotive Refinishing,Multi-Hole Foam Sanding Discs for Automotive Refinishing | Aozhong
  • Hook and Loop Multi-Hole Foam Sanding Discs for Automotive Refinishing,Multi-Hole Foam Sanding Discs for Automotive Refinishing | Aozhong

Description

Hook and Loop Multi-Hole Foam Sanding Discs for Automotive Refinishing

Foam-backed abrasive discs for automotive bodywork, primer sanding, paint preparation, clear-coat refinement, and dust-extraction sanding.

Aozhong Hook and Loop Multi-Hole Foam Sanding Discs for Automotive Refinishing combine an abrasive layer, foam layer, loop backing, and multi-hole extraction pattern in one disc.

The foam layer conforms to panel curves and distributes contact pressure during sanding. This construction supports work on bumpers, fenders, mirror housings, door contours, panel transitions, and coated plastic parts.

The multi-hole pattern creates extraction paths across the disc surface. When the disc is used with a compatible multi-hole backing pad and dust extractor, sanding debris can pass through the abrasive layer, foam, and loop backing.

Aozhong supplies the discs with options for color, abrasive mineral, P-grit, foam material, foam thickness, foam hardness, disc diameter, center hole, perforation pattern, printing, and packaging. The product is intended for abrasive distributors, automotive refinishing suppliers, body shops, paint shops, coating lines, and volume users.

Foam-Backed Multi-Hole Sanding Disc

Flexible abrasive-disc construction for contours, curved panels and compatible dust-extraction sanding systems.

01

Flexible Foam Layer

The foam layer supports contact across contours, curves and shaped panels.

02

Multi-Hole Extraction

The perforated layout connects sanding dust with a compatible extraction backing pad.

03

Hook-and-Loop Backing

Loop backing supports disc attachment, removal and replacement between sanding stages.

04

One-Piece Construction

Abrasive, foam and loop layers are laminated into one converted sanding disc.

05

Center-Hole Options

Center-hole and no-center-hole configurations can be produced for different pad systems.

P800 FOAM ABRASIVE
Abrasive Foam Loop
ONE-PIECE LAMINATED DISC Foam-Backed Multi-Hole Abrasive Abrasive · Foam · Hook-and-loop backing
06

Abrasive Mineral Options

Abrasive mineral and coating configuration can be selected by substrate and sanding stage.

07

Configurable Foam

Foam material, thickness and hardness can be specified according to the required contact response.

08

Color Identification

Color coding supports product identification, grit sorting and workstation control.

09

Diameter and Perforation Options

Disc diameter, hole size and perforation layout can be configured for compatible sanding systems.

10

OEM Packaging Support

Printing, labels, boxes, pack quantities and export cartons can be produced for OEM orders.

ORDER CONFIGURATION Buyer-Defined Product Options
Disc Diameter Abrasive Mineral Grit Foam Thickness Foam Hardness Center Hole Perforation Color Printing Packaging

Applications

Foam-backed sanding discs for contours, curved panels, coating refinement and controlled surface preparation.

Application Area Typical Components and Tasks Process Guidance
Automotive Primer Sanding Flat-to-curved vehicle panels
  • Filler-primer sanding
  • Primer-surfacer sanding
  • Repair-primer sanding
  • Panel-transition refinement
Used for primer sanding on flat, curved and transitional vehicle surfaces.
Curved Panel Sanding Contour-following preparation
  • Bumpers and fenders
  • Mirror covers
  • Door contours
  • Body transitions
  • Coated plastic components
The foam layer distributes contact pressure and follows curved or shaped surfaces.
Paint Preparation Scratch-pattern transition
  • Previous-scratch refinement
  • Repair-area preparation
  • Paint-edge transition
  • Preparation for the next coating
Select the grit according to the preceding sanding stage and the next coating-system requirement.
Clear-Coat Refinement Fine defect correction
  • Clear-coat defect refinement
  • Fine scratch reduction
  • Localized repair preparation
  • Pre-polishing preparation
Fine-grit versions can support clear-coat refinement. Process control is required to avoid coating strike-through.
Filler Edge Transition Curved repair-area refinement
  • Filler-edge refinement
  • Repair-area blending
  • Curved filler transitions
  • Preparation before primer
Use after the main filler-leveling stage. A foam disc should not replace a firm sanding block when panel flatness must be established.
Plastic and Composite Parts Application-test dependent
  • Painted plastic
  • Fiberglass components
  • Composite panels
  • Automotive coated parts
Abrasive mineral, grit, foam hardness and machine settings should be confirmed through application testing.
Industrial Coatings Coated-component preparation
  • Furniture coatings
  • Transport equipment
  • Marine coatings
  • Appliance panels
  • Industrial coated components
The product may be evaluated on these coating systems. Testing is required before production use.
GENERAL PROCESS DIRECTION Controlled Contour Sanding
01 Inspect Confirm substrate and surface condition
02 Select Match grit, foam and backing pad
03 Refine Reduce the previous scratch pattern
04 Verify Inspect before the next coating stage
!

Use a firm block when flatness must be established. Foam-backed abrasives support contour contact and surface refinement, but they should not replace a firm leveling tool during the main filler shaping stage.

Aozhong Manufacturing Support

Aozhong is an abrasive product manufacturer supplying distributors, private-label programs, repair systems, coating operations and volume users.

Production Stage Manufacturing Controls Control Purpose
01
Abrasive Configuration Mineral, grit and backing
  • Abrasive-mineral selection
  • P-grit configuration
  • Paper-backing options
  • Film-backing options
  • Cloth and composite backing options
Establishes the cutting action, scratch pattern and backing response required for the target material and sanding stage.
02
Foam Configuration Contact and flexibility control
  • Foam-material selection
  • Foam-thickness control
  • Foam-hardness control
  • Compression-response inspection
Defines pressure distribution, contour conformity and sanding response on curved or shaped surfaces.
03
Lamination Control One-piece product construction
  • Abrasive-to-foam lamination
  • Loop-backing lamination
  • Layer-position inspection
  • Loop-adhesion inspection
Connects the abrasive, foam and loop layers into one converted disc while controlling alignment and layer bonding.
04
Disc Conversion Diameter and hole processing
  • Round die cutting
  • Multi-hole perforation
  • Center-hole processing
  • Diameter and tolerance inspection
  • Hole-position inspection
Confirms disc dimensions and hole alignment for the approved backing pad and dust-extraction system.
05
Identification and Printing Product and grit control
  • Color coding
  • Backing-side printing
  • P-grit identification
  • Product-label preparation
Supports product identification, grit sorting, workstation control and buyer-defined branding.
06
Packaging and Batch Control OEM and repeat-order supply
  • Box configuration
  • Export-carton configuration
  • Batch identification
  • Inspection-record preparation
  • Sample approval for repeat orders
Supports packaging accuracy, batch traceability, private-label programs and repeat-order comparison.
REPEAT-ORDER CONTROL

Approved Product Specification

The approved specification and control sample provide references for production, outgoing inspection and buyer incoming inspection.

01Diameter
02Tolerance
03Abrasive Mineral
04P-Grit
05Backing
06Foam Material
07Foam Thickness
08Foam Hardness
09Hole Pattern
10Center Hole
11Loop Adhesion
12Operating Conditions
13Packaging
14Inspection Requirements
15Approved Sample

Frequently Asked Questions

Product customization, sample testing, repeat-order control and OEM packaging for foam-backed sanding discs.

01 Can Aozhong customize the foam material and hardness?

Yes. Foam material, thickness, density, hardness, color, and compression behavior can be configured according to the panel shape, sanding tool, grit, and process. Samples should be approved before a volume order.

02 Can you match our backing pad and extraction system?

Yes. Buyers can provide the backing-pad diameter, hole layout, tool model, drawing, or physical sample. Aozhong can then confirm the disc diameter, center hole, perforation pattern, and loop backing.

03 How does Aozhong control repeat-order consistency?

Control items can include abrasive raw-material lot, grit, disc dimensions, hole position, foam thickness, foam hardness, lamination strength, loop attachment, cut rate, scratch pattern, package quantity, and batch code. An approved sample and specification can be retained as the production reference.

04 Can we receive samples before placing a distributor or volume order?

Yes. Samples can be prepared according to the requested mineral, grit, foam, diameter, hole pattern, and packaging. Buyers can evaluate cut rate, conformity, extraction, loading, scratch pattern, and product life.

05 Can the product be supplied with OEM packaging?

Yes. OEM options include abrasive color, foam color, backing print, product code, label, barcode, pieces per box, box design, and shipping-carton configuration.

Leave a message
お名前 *
メールアドレス *
会社名
お問い合わせ内容・ご希望の製品仕様