Conforms to shapes
Scouring pads can be bent to conform to flat surfaces, curved surfaces, grooves and edges, making them suitable for areas that are difficult to reach with sandpaper.
Four non-woven abrasive hand pads for cleaning, rust removal, scuffing, blending and surface preparation.
Aozhong Non-Woven Surface Conditioning Hand Pad Set combines four hand-pad specifications in one product program. The supplied set contains green, maroon, grey and purple pads for different surface treatment stages.
The pads are made from a synthetic-fiber web containing abrasive grain bonded with resin. Unlike coated sandpaper, the abrasive is distributed through a three-dimensional fiber structure rather than applied to a paper or cloth backing.
The pads can be used by hand, with a hand-pad holder or with compatible finishing equipment. The material bends around edges, curves, grooves and formed parts, making it suitable for areas where a sanding sheet cannot maintain contact.
The set is intended for abrasive distributors, automotive refinishing suppliers, metalworking companies, maintenance contractors and manufacturers with surface preparation requirements.
Scouring pads can be bent to conform to flat surfaces, curved surfaces, grooves and edges, making them suitable for areas that are difficult to reach with sandpaper.
The fibre mesh distributes pressure applied by the hand, making it suitable for surface cleaning, texture adjustment and light finishing. It is not suitable as a substitute for sandpaper for heavy material removal or dimensional correction.
The mesh-like pores can accommodate abrasive debris and contaminants, helping to reduce surface clogging.
Can be cut to suit the dimensions of parts and tools:
The whole sheet can be held directly in the hand, or used in conjunction with a hand-held scouring pad holder, clamping block or straight-line tool.
Unlike steel wool, the synthetic fibres themselves do not rust, nor do they leave behind fine metal burrs. Relevant industrial hand pad literature lists this as one of its uses as a substitute for steel wool.
The kit format enables distributors and end customers to cover processes such as cleaning, general handling, fine-graining of scratches and preparation for painting in a single purchase.
In automotive refinishing, these products are also called scuff pads. They are used to create a surface condition for the next coating stage rather than to perform dimensional stock removal.
A process test is required for transparent plastic, soft polymer, painted trim or appearance parts.
Aozhong manufactures abrasive products for distributors, converters and production users. The hand-pad program can be managed through:
The four-grade set can be packed as an assortment or supplied as single-grade packs for distributor replenishment.
Each grade can be controlled through a product specification covering color, abrasive mineral, fiber density, thickness, unit weight and target application. Finished pads are checked by batch before set assembly.
Buyers can request product samples for application and reference-grade comparison. Testing should use the buyer’s material, pressure, fluid and process method. The approved sample can then be linked to the purchase specification.
They can be supplied to a defined market-reference requirement, but color alone does not confirm equivalence. Cut rate, scratch pattern, abrasive mineral, density and application performance should be compared before the Type designation is approved.
Compatibility depends on the resin, fiber and abrasive formulation. The operating liquid should be stated during product selection. Aozhong should confirm compatibility through the technical specification or sample test.
Set configuration, label, barcode, inner-pack quantity, carton quantity and private-label packaging can be prepared according to the confirmed order specification and approved artwork.