• Pink Rectangular Hook and Loop Foam Sanding Pads
  • Rectangular foam sanding sheets for hand sanding
  • Pink foam-backed abrasive pads with white loop backing
  • Custom foam sanding pads with loop backing
  • Pink Rectangular Hook and Loop Foam Sanding Pads
  • Rectangular foam sanding sheets for hand sanding
  • Pink foam-backed abrasive pads with white loop backing
  • Custom foam sanding pads with loop backing

Pink Rectangular Hook and Loop Foam Sanding Pads | Aozhong

No.AZ-PFSP-S100-P800-SC-F5S-WL-NH
Aozhong manufactures Pink Rectangular Hook and Loop Foam Sanding Pads for automotive refinishing, primer sanding and surface preparation. Custom size, grit, abrasive, foam, holes and loop backing are available.
Product Name
Sponge Sanding Pad / Foam Backed Sanding Pad
Shape
Square
Backing
High-density foam
Abrasive Type
Aluminum Oxide / Customized
Color
Pink (Fine / Super Fine Grade)
Available Grit Range
P240 – P2000 (customizable)
Size
Standard sizes available
Thickness
Customized based on application
Foam material
PU, EVA or project-specified foam
Foam thickness
Custom
Loop material
Nylon or polyester
Shape options
Rectangle, square, strip, disc or die-cut shape
  • Pink Rectangular Hook and Loop Foam Sanding Pads
  • Rectangular foam sanding sheets for hand sanding
  • Pink foam-backed abrasive pads with white loop backing
  • Custom foam sanding pads with loop backing

Description

Pink Rectangular Hook and Loop Foam Sanding Pads

Aozhong Pink Rectangular Hook and Loop Foam Sanding Pads combine an abrasive surface, carrier, foam layer and loop backing in one hand-sanding product.

The foam compresses under sanding pressure and helps the abrasive surface follow curves, edges, profiles and recessed areas.

These foam-backed abrasive pads are designed for automotive refinishing, primer sanding, paint preparation, woodworking, metal finishing, plastic processing and composite surface preparation. They can be used by hand or attached to a compatible hook-faced hand sanding block.

Aozhong supports customization of size, shape, abrasive grain, FEPA P-grit, foam material, foam thickness, foam hardness, loop-backing color, hole pattern, label and packaging.

Pink is the product-face color. It does not identify the abrasive grain or grit.

Product Features

Configurable rectangular foam-backed abrasives for flat surfaces, contours, edges, corners and hand-sanding applications.

Rectangular format covers flat areas, edges and corners.

Foam layer follows curves and profiles.

Foam distributes finger pressure during hand sanding.

Loop backing allows attachment and removal from a hand block.

Non-perforated face provides a continuous sanding area.

RECTANGULAR FOAM BACKED
HAND SANDING · FLEXIBLE CONTACT · HOOK & LOOP

Perforated versions can be produced from a customer hole drawing.

Abrasive grain can be selected for the workpiece and sanding stage.

Foam thickness and hardness can be specified for support or conformity.

Dimensions and shapes can be produced from a drawing or sample.

Labels, cartons and package quantities can be supplied for distributor programs.

Applications

Automotive Refinishing

  • ✓Body filler sanding
  • ✓Primer sanding
  • ✓Paint preparation
  • ✓Clear-coat scratch refinement
  • ✓Bumper sanding
  • ✓Mirror-housing sanding
  • ✓Door-handle recess sanding
  • ✓Body-panel contour sanding
  • ✓Edge and profile sanding
  • ✓Preparation before polishing

Woodworking

  • ✓Wood primer sanding
  • ✓Paint and lacquer preparation
  • ✓Cabinet profile sanding
  • ✓Furniture edge sanding
  • ✓Curved wood-part sanding
  • ✓Molding preparation

Metalworking

  • ✓Surface preparation before coating
  • ✓Aluminum sanding
  • ✓Stainless-steel scratch refinement
  • ✓Oxidation removal
  • ✓Edge blending
  • ✓Contour sanding

Plastics and Composites

  • ✓Plastic housing preparation
  • ✓Mold-line removal
  • ✓Fiberglass sanding
  • ✓Composite panel preparation
  • ✓Coating-defect correction

Foam Selection Guide

Foam Configuration Sanding Behavior Application
Thin or firm foam More sanding feedback and leveling control Flat panels and primer leveling
Medium foam Balance of support and conformity Body panels and process sanding
Soft or thick foam More contact around curves and profiles Bumpers, recesses and shaped parts

Softer Foam

Follows curves and profiles but may reduce leveling action.

Firmer Foam

Provides more support but has less conformity around profiles.

Foam selection should be based on whether the process requires surface leveling or contour contact.

Aozhong Manufacturing Support

Aozhong manufactures and converts abrasive products for distributors, private-label programs and industrial users.

01

Abrasive Material Selection

02

Foam Selection

03

Layer Lamination

04

Loop-Backing Conversion

05

Sheet and Shape Die Cutting

06

Hole Punching

07

Dimension Inspection

08

Labeling

09

Packaging

10

Batch Identification

Custom Development

Configuration based on the customer’s sanding process.

  • ✓Target workpiece
  • ✓Sanding stage
  • ✓Required grit sequence
  • ✓Pad length and width
  • ✓Foam thickness and hardness
  • ✓Hook-and-loop system
  • ✓Dust-extraction layout
  • ✓Package quantity
  • ✓Distributor SKU structure

Inspection Items

Controls defined in the approved purchase specification.

  • ✓Length and width tolerance
  • ✓Total thickness
  • ✓Corner geometry
  • ✓Cut-edge condition
  • ✓Foam density and hardness
  • ✓Compression recovery
  • ✓Grit identification
  • ✓Coating appearance
  • ✓Grain shedding
  • ✓Cut-rate comparison
  • ✓Scratch pattern
  • ✓Layer peel strength
  • ✓Loop engagement
  • ✓Hole position
  • ✓Package quantity
  • ✓Batch code

Specification-Based Repeat-Order Control

Repeat orders are controlled against an approved product specification rather than by color alone.

Frequently Asked Questions

01 Is Aozhong the manufacturer of these foam sanding pads?

Yes. Aozhong manufactures and converts abrasive products for distributor, OEM and industrial orders. The production scope can include material selection, lamination, die cutting, hole punching, inspection, labeling and packaging. Factory and quality documents can be discussed during supplier qualification.

02 Can the size, grit and foam be customized?

Yes. Length, width, thickness, shape, abrasive grain, P-grit, foam material, foam hardness, loop color and hole pattern can be produced according to a drawing, sample or application requirement. Parameters are confirmed before production.

03 How does Aozhong control repeat-order consistency?

Orders can be linked to an approved specification covering materials, dimensions, grit, foam, backing, lamination and packaging. Incoming-material inspection, production checks and batch records can be included in the agreed quality plan.

04 Can samples be tested before a volume order?

Yes. Samples can be prepared for cut rate, scratch pattern, foam recovery, loop engagement, edge condition and lamination testing. The buyer should test samples on the intended workpiece, coating and hand-sanding process.

05 What information can be supplied with the order?

Available information may include product specifications, packing details, batch identification and inspection records. Document availability depends on the product configuration, destination market and purchase agreement.

Leave a message
お名前 *
メールアドレス *
会社名
お問い合わせ内容・ご希望の製品仕様