Ultra-Soft Web
The pad bends around curves, corners, grooves and formed parts. It can be folded for narrow areas or wrapped around pipes and profiles.
A non-woven abrasive pad for hand sanding, metal brushing, rust removal, surface blending and coating preparation.
Aozhong Purple Ultra Soft Non-Woven Abrasive Hand Pad is designed for manual surface preparation on metal, paint, wood, plastic and composite parts.
The pad uses a non-woven fiber web rather than a paper, cloth or film backing. Abrasive grain is distributed through the web and secured with resin. This construction allows the pad to bend, compress and recover during hand sanding.
The product can be used flat, folded or cut into strips. It is intended for abrasive distributors, metalworking suppliers, automotive refinishing suppliers, maintenance companies and manufacturing users.
Aozhong can configure the abrasive mineral, fiber material, web density, dimensions, thickness, color, logo, backing and packaging according to the approved order specification.
The pad bends around curves, corners, grooves and formed parts. It can be folded for narrow areas or wrapped around pipes and profiles.
The fiber web spreads hand pressure across the contact area. This helps limit finger marks during surface blending and coating preparation.
Spaces between the fibers hold rust particles, oxidation, coating residue and sanding debris. This reduces surface blockage during use.
Product illustration
Both sides can be used because the product shown has no separate backing layer.
The pad is intended for cleaning, brushing, blending and coating preparation rather than dimensional stock removal.
The synthetic-fiber web does not rust or release metal splinters from the pad material. Non-woven hand pads are used as an alternative to steel wool for cleaning and finishing.
The hand pad can be cut into:
Color, logo, grade code and packaging can be configured for distributor programs and production-line identification.
For a directional finish, operate the pad in one direction and control pressure, overlap and number of passes.
The pad is intended for light rust, surface oxidation and residue. Scale, weld slag and bonded corrosion may require a coated abrasive, abrasive belt, fiber disc or cleaning wheel before the hand-pad stage.
A sample test is recommended on light-colored wood to check for color or residue transfer.
Transparent plastic, coated trim and appearance parts require process testing before production use.
Aozhong manufactures and converts abrasive products for distributors and volume users. Production control for the Purple Ultra Soft Non-Woven Abrasive Hand Pad can include:
These controls allow distributor and production orders to be linked to a defined product specification rather than color alone.
Samples can be prepared according to the requested size, thickness, abrasive mineral, grade, web density and backing. Buyers should test the sample on the target material before approving the production specification.
Repeat orders can be linked to an approved specification covering fiber, web density, abrasive mineral, resin add-on, dimensions, thickness, color and packaging. Finished products can be identified by batch.
No. Purple is a product-identification color. Abrasive mineral, particle size, web density and resin content determine cut rate and scratch pattern. The grade must be stated separately.
A hook-and-loop backing can be added for hand blocks or compatible tools. Backing material, adhesive, dimensions and operating conditions must be included in the order specification.
Aozhong can configure product codes, labels, logos, barcodes, inner-pack quantities and export cartons according to approved artwork and purchase specifications.