Aozhong 30 × 90 mm Hook and Loop Sanding Sheets are abrasive replacement sheets for compatible hand sanding blocks. Each sheet measures 30 mm wide and 90 mm long, with a loop backing that attaches to the tool’s hook surface.
Depending on the abrasive and grit selected, these detail sanding sheets can be configured for wood, resin, plastic, filler and coating preparation.
Aozhong manufactures the series for distributors and volume users. Abrasive, backing, dimensions, color, logo and material configuration can be customized around the customer’s workpiece and sanding tool.
The sheets are supplied in a 30 × 90 mm format, reducing cutting at the workstation. Dimensional tolerances can be agreed around the customer’s tool.
The loop-backed sanding sheets can be removed from the tool when worn or when changing grits. Attachment performance depends on the loop construction and the condition of the tool’s hook surface.
Application schematic · Tool shown for illustration.
The sanding block supports the sheet during use. Tool-base flatness and hardness affect pressure distribution, leveling and edge control.
The strip format suits small work areas and narrow faces where the complete tool can reach. Access depends on the tool body as well as the abrasive dimensions.
| Application | Tasks | Selection Note |
|---|---|---|
| Models and resin parts | Seam refinement, filler leveling and surface preparation | Protect molded details, edges and thin sections |
| Woodworking | Small-part sanding, edge refinement and repair preparation | Match grit to the wood and finishing process |
| Plastic components | Local surface correction and preparation before coating | Control pressure and heat |
| Coating repair | Filler refinement, edge transitions and primer preparation | Follow the coating system’s grit requirements |
| Metal components | Local surface preparation and scratch refinement | Confirm abrasive compatibility and contamination controls |
For buyers selecting model sanding sheets, resin sanding sheets or plastic sanding sheets, sample testing should use the intended material and required finish.
This format does not replace a long sanding board where panel contour and leveling require a larger supporting surface.
Aozhong supports customization of abrasive, backing and material configuration for the target sanding process.
The standard sheet format is 30 × 90 mm. Other dimensions can be specified around the customer’s tool and working area, subject to production confirmation.
Color and logo customization support distributor ranges. Grit and product identification should remain readable during storage and use.
For buyers seeking an OEM sanding sheet manufacturer, Aozhong can develop the product around an agreed specification covering materials, dimensions and branding.
Aozhong manufactures abrasive products for distributors and volume users. Customization includes abrasive, backing, dimensions, color, logo and materials.
Provide the tool’s working-face dimensions, hook-surface details or a tool sample. Evaluate sheet coverage, attachment, sliding and removal before approving the specification.
Request a sample in the intended abrasive, backing and grit. Test it on the actual workpiece for cutting, scratches, loading, grain retention and attachment behavior.
Approve a specification and reference sample. Agree on dimensional tolerances, material configuration, grit, attachment performance, labeling and pack quantity before production.
Tool inclusion must be stated in the order. Refill packs and tool-and-sheet kits should have separate product codes, with the tool count and abrasive-sheet quantities listed.