Floor Sanding Abrasives Guide: How to Choose Grit, Belts and Sanding Discs

Learn how to choose floor sanding abrasives for hardwood refinishing, including sanding belts, discs, grit progression, edge sanding and final surface preparation.
Oct 6th,2026 147 ビュー
カタログ

Abrasives for Floor Sanding and Refinishing: Grit, Product and Application Guide

Wood floor sanding is not simply a matter of using coarse sandpaper first and fine sandpaper later.

A professional floor refinishing process may need to remove old finish, flatten uneven boards, refine scratches, sand edges, prepare bare wood for stain or finish, and sometimes lightly abrade an existing coating before recoating.

Each stage needs a different abrasive structure.

A practical selection method is:

Floor Condition → Sanding Stage → Machine Type → Grit Sequence → Final Finish

For flooring contractors and abrasive buyers, this is more useful than choosing a product only by grit number.

Aozhong's current abrasive range includes abrasive belts, sanding discs, sheets, rolls, mesh abrasives, sanding sponges and non-woven products, allowing different formats to be matched to different floor sanding and maintenance stages.

1. Start with the Floor Condition

The first question should be:

What does the floor actually need?

A floor with deep scratches and worn finish requires a different sanding process from a relatively flat floor that only needs preparation for a maintenance coat.

Floor Condition Main Requirement Abrasive Direction
Thick old finish Coating removal Coarse abrasive
Uneven hardwood floor Flattening Coarse belt / sanding abrasive
Normal worn floor Finish removal + refinement Medium grit progression
Bare wood with machine marks Scratch refinement Medium / fine abrasive
Edges and corners Local controlled sanding Disc / sheet
Fine surface before finishing Scratch consistency Fine abrasive
Existing finish before recoating Light abrasion / cleaning Fine or non-woven product

Industry guidance from the National Wood Flooring Association recommends beginning with the finest abrasive that can still remove the existing coating and flatten the floor, rather than automatically starting with the coarsest available grit.

This helps reduce unnecessary wood removal and reduces the number of deep scratches that later stages need to remove.

2. Choose the Grit Sequence According to the Job

Grit progression is one of the most important parts of wood floor sanding.

A coarse abrasive creates deep scratches. The next abrasive needs to remove those scratches before the floor moves to a finer stage.

A practical reference range is:

Floor Sanding Stage Typical Reference Range Main Purpose
Heavy Finish Removal P24–P40 Remove difficult coating / heavy defects
Initial Floor Leveling P36–P60 Flatten floor and remove coarse marks
Intermediate Sanding P60–P80 Remove previous scratches
Fine Wood Sanding P80–P100 Prepare bare wood
Final Fine Sanding P100–P120+ Finish-system dependent preparation
Between-Coat / Light Refinement P120–P180+ Depends on coating specification

These ranges are not a fixed recipe.

Wood species, floor condition, stain, finish chemistry and sanding equipment can change the correct final grit.

NWFA guidance emphasizes progressive sanding because each finer abrasive should remove scratches from the previous cut; excessive grit skipping can leave deeper scratches visible in the finished floor.

A simple working rule is:

Do not move finer until the previous scratch pattern has been removed.

And before staining or applying finish, follow the finish manufacturer's recommended final sanding grit. Recent NWFA industry guidance notes that different finishing systems may call for different final grit ranges.

3. Abrasive Belts for Large-Area Floor Sanding

Large wood floors require efficient material removal.

For compatible belt-type floor sanding equipment, abrasive belts are useful because they provide a large continuous sanding surface.

They are mainly suited to:

  • old finish removal;
  • floor leveling;
  • large-area sanding;
  • scratch refinement;
  • production-style continuous sanding.

Aozhong Abrasive Belts can be customized in size, grit, backing, abrasive type and belt joint. The current belt range is designed for continuous sanding equipment and large-area contact applications. 

For a floor-sanding buyer, the key specifications should include:

Belt Specification What to Confirm
Belt Size Match floor sanding machine
Grit Based on sanding stage
Backing Strength and flexibility requirement
Abrasive Grain Wood / coating requirement
Belt Joint Machine and working condition
Surface Condition Bare wood or coated floor

The machine dimensions should always be confirmed before ordering.

A belt made for one sanding machine should not be assumed to fit another simply because the grit is the same.

4. Sanding Discs Are Important for Edges and Final Refinement

A large floor sander cannot reach every part of the room.

Edges, wall lines, corners and local repair areas usually require a different machine or hand sanding method.

This makes sanding discs an important second product group.

Typical applications include:

  • floor edging;
  • areas around walls;
  • local scratch repair;
  • transitions;
  • final orbital sanding;
  • blending between field and edge areas.

Aozhong currently offers Hook & Loop, PSA, paper, film and mesh sanding formats with customizable grit, size and hole pattern.

Match the edge sanding grit to the main floor process

One common problem is creating a different scratch pattern around the room perimeter.

If the main floor is refined to a fine grit but the edge area remains much coarser, the difference may become visible after staining.

The field and edge sanding processes should therefore move through compatible grit stages.

Floor Area Product Direction
Main Floor Abrasive Belt / Large Machine Abrasive
Edges Sanding Disc
Corners Sanding Sheet / Detail Abrasive
Difficult Profiles Sanding Sponge
Final Orbital Refinement Fine Sanding Disc

5. Dust Extraction and Loading Matter in Floor Sanding

Wood floor sanding generates significant dust.

Old finishes can also load the abrasive surface, especially during the first sanding stages.

When the abrasive becomes loaded:

  • cutting slows;
  • the operator may increase pressure;
  • sanding temperature can increase;
  • abrasive consumption may rise;
  • scratches may become less consistent.

For compatible orbital or multi-disc sanding systems, Mesh Sanding Discs can be useful where dust extraction is a priority.

Aozhong's mesh abrasives use an open fiber or polyester structure that allows sanding debris to move through the abrasive surface toward a compatible extraction system.

However, mesh is not automatically the best product for every floor stage.

Heavy floor flattening may still require a stronger belt or coated abrasive structure.

A practical selection is:

Sanding Requirement Product Direction
Heavy Floor Leveling Abrasive Belt
Heavy Finish Removal Coarse Belt / Disc
General Wood Refinement Sanding Disc
Dust-Controlled Orbital Sanding Mesh Disc
Final Fine Sanding Fine Disc / Sheet
Detail Sanding Sponge / Sheet

The abrasive is only one part of dust control.

Machine → Abrasive → Extraction Port → Hose → Dust Collector

all need to work together.

6. Solid Hardwood and Engineered Flooring Should Not Be Treated the Same

This is especially important for professional floor sanding.

Solid hardwood provides more wood thickness for sanding.

Engineered flooring has a hardwood wear layer over another substrate. The amount of material that can safely be removed depends on the thickness and condition of that wear layer.

NWFA notes that the number of times a floor can be sanded depends on factors including the wear-layer thickness, floor flatness, equipment and contractor skill.

For engineered flooring, buyers and contractors should therefore confirm:

  • wear-layer thickness;
  • previous refinishing history;
  • floor manufacturer's instructions;
  • depth of existing damage;
  • whether full resanding is permitted.

Aggressive P24 or P36 sanding should never be selected automatically simply because the floor has scratches.

Sometimes a lighter sanding or recoating process is the more appropriate option.

Floor Type Comparison
Floor Type Main Risk Abrasive Selection Focus
Solid Hardwood Deep scratch pattern / over-sanding Correct grit progression
Engineered Wood Sanding through wear layer Material removal control
Parquet Different grain directions Sanding direction and control
Previously Coated Floor Abrasive loading Coating condition
New Bare Wood Floor Machine / installation marks Flattening + refinement

7. Sanding and Floor Maintenance Are Different Processes

This distinction is useful for both contractors and distributors.

A floor that needs complete refinishing may require sanding back toward bare wood.

A floor in relatively good condition may only require cleaning, light abrasion and recoating.

NWFA distinguishes a maintenance coat from a full sand-and-refinish process: a maintenance coat can involve cleaning the existing finish, lightly abrading it and applying another finish coat, while deeper damage may require complete sanding and refinishing.

This is where different Aozhong products serve different purposes.

Full Floor Refinishing

Use products such as:

Floor Maintenance and Surface Cleaning

Aozhong also manufactures Non-Woven Floor Scrubber Pads for disc-type floor cleaning and polishing machines.

These pads are available in multiple diameters, including 13–24 inch options and custom sizes, and are designed for cleaning, scrubbing, maintenance and surface treatment applications.

They should not be confused with aggressive floor-sanding abrasives.

Process Product Type Purpose
Full Refinishing Belt / Sanding Disc Remove finish and wood
Scratch Refinement Fine Abrasive Reduce sanding marks
Light Surface Abrasion Fine / Non-Woven Product Prepare suitable existing finish
Floor Scrubbing Non-Woven Floor Pad Cleaning
Maintenance Cleaning Floor Scrubber Pad Remove dirt / residue
Polishing / Maintenance Suitable Floor Pad Surface maintenance

This gives distributors a clearer product structure:

Floor Sanding Products ≠ Floor Cleaning Pads

Both belong to flooring applications, but they solve different problems.

Recommended Aozhong Product Selection for Floor Applications

For B2B buyers, a practical flooring abrasive line could be structured like this:

Floor Application Aozhong Product Direction
Heavy Hardwood Sanding Custom Abrasive Belt
Old Finish Removal Coarse Belt / Sanding Disc
Intermediate Sanding Medium Abrasive Belt / Disc
Floor Edging Sanding Disc
Orbital Final Sanding Hook & Loop Sanding Disc
Dust-Controlled Fine Sanding Mesh Sanding Disc
Corners / Detail Work Sanding Sheet
Profiles / Difficult Areas Sanding Sponge
Maintenance Scrubbing Non-Woven Floor Scrubber Pad
Commercial Floor Cleaning Floor Scrubber Pad

Aozhong's broader abrasive range includes discs, belts, sheets, rolls, mesh products, sponges and non-woven products, with customization available for dimensions, grit, backing, abrasive structure and packaging.

For a flooring distributor, this makes it possible to build separate product lines for:

professional refinishing
and
floor maintenance

instead of treating all flooring consumables as one category.

Leave a message
お名前 *
メールアドレス *
会社名
お問い合わせ内容・ご希望の製品仕様